Description
Introduction
Hot runner heaters also known as cable heaters can be formed to a variety of shapes as require by its many applications. Frequently though, hot runner heaters are configured as small diameter, high performance nozzle heaters that are fully annealed.
Hot runner heaters are used on injection molding machine nozzles and sprue bushings supplying 360º of heat with optional distributed wattage models also available. Hot runner heaters are also used as cartridge heaters where irregular size bores are found. A straight, round cable heater can snake through a sealing bar in packaging equipment installations.
Sectional area |
3X3,4.2X2.2,4X2,4X2.7,4X2.5 3.3 X 3.3 3.5 X 3.5 4 X 4,2.2X1.3 |
Minimum ID |
8mm |
Sheath Material |
SS304,SS310 |
Insulation Material |
High Pure MgO |
Resistance Wire |
Cr20Ni80 |
Maximum Sheath Temperature |
700°C |
Die Electrical Strength |
800V A/C |
Insulation |
> 5 M W |
Dimensional Tolerance |
Coil I.D + 0.1 to 0.2mm// Coil Length + 1mm |
Wattage Tolerance |
+ 10% (+ 5% Available Upon Request) |
Voltage |
12V~380V |
Wattage |
70W~1000W |
Build-in thermocouple power |
without or with J/K thermocouple |
Sheath's length |
500/1000/1200/1500/2000mm |
Available sheath |
nylon,metal braided,fiberglass ,silicone rubber, kevlar |
Sheath's color |
standard is black,other color is also available |
Connector |
without or with 5 pin xlr,4 pin min xlr connector |
Connector' color |
silver or fully black |
Features
1. Standard sizes available with a various cross section
2. The precision fit on Hot Runner Nozzles
3. Various Watt Density option available
4. Highly Non-corrosive
5. Designed for even heat profile
6. Maximum heat transfer due to more contact area
Applications
1. Injection moulding machine nozzle
2. Hot Runner Nozzles & Bushings
3. Packaging machinery
4. Hot runner Injection moulds.
5. Injection & Blow Moulding Machine Nozzles.
6. PET preform & Thin wall container Moulds
7. Hot runner Manifolds.
Order Guider
1.Cross Section
2.Circles / length/ diameter
3.Voltage
4.Wattage
5.Quantity
Product Paramenters